To display pricing, print or e-mail a quotation or order, you must follow these basic steps:+ Click here for general instructions
+ Click here for product-specific instructions- Close product-specific instructions

Use this page to print a price quote, e-mail a quote to someone or to yourself, or to order
Note E-mailing a quote to yourself speeds up the ordering process when you click on the link as it remembers the exact material combinations you selected, which you would have to reselect if you just print a hard copy. Save paper by E-mailing.

Follow these simple steps to use this page:

1.) Type in the desired quantity you wish to quote, e-mail or order online (See footnote below)

2.) Update the quantity to apply a quantity discount, if applicable

3.) Type in a pre-assigned approved discount code if you were given one

4.) Next do this"Click Here to apply discount "

4.) Click on any one of these tabs: Print This Page, or E-mail This Page, or Proceed To Order/Checkout
The E-mail feature allows you to generate the price quote which you will immediately receive in your in box which you can easily retrieve later. A separate quote number will be assigned to each item which can be referenced on future orders.

5.) A final part number will not be assigned until the selection becomes an order and it will appear on the invoice and product nameplate

6.) Follow additional instructions from the next pages

Note! Printing or e-mailing a quote cannot generate an order.
The ordering process can only be started by clicking the Order/Checkout button
and you must have your credit card in front of you.
When not ordering by credit card you must include a printout of the specific options displayed on this page, otherwise we cannot proceed with the order

Back Pressure Control Pressure Regulator

BPS-09-Npt Stainless Steel Back Pressure Bypass Valve

View Pricing/Ordering Instructions

view prices order

Spring diaphragm operated
1/4"-2" NPT THD
Control pressures to 80 PSI (5.2 Bar)
Stainless steel (Various Exotic Alloys model can be found on this page)

Printable
Product Specs Instructions

BPS-09-Npt Stainless Steel Back Pressure Bypass Valve

view prices order

Printable
Product Specs Instructions

View Pricing/Ordering Instructions

Spring diaphragm operated
1/4"-2" NPT THD
Control pressures to 80 PSI (5.2 Bar)
Stainless steel (Various Exotic Alloys model can be found on this page)

Applications

Features

Principle of Operation

Dimensions/Material Item List

This valve is used for back pressure control applications such as maintaining constant pump discharge pressures, bypassing excessive pressures from various types of process equipment, and wherever a constant pressure must be maintained in a process or piping system. Valve can be used for non-corrosive or mildly corrosive fluids, depending on the materials selected. When liquids or gases contain debris or other solid matter which might cause internal clogging or improper operation of the valve, a strainer with a fine wire mesh should be installed before the inlet of the valve. In-line strainer fittings or basket strainers can be purchased from Stra-Val. For gas or air service, a soft-seated version with Teflon or other engineering plastics is available to improve seating performance.

Pressure-containing parts made from solid bar stock materials — unlike castings which have wall thickness variations.
Body: Standard materials are stainless steel type 303SS and 316SS.
Trim: Stainless steel for main valve is standard. Teflon sealing option is also available for air or gas service.
Teflon-Viton composite reinforced diaphragm is designed for much greater main valve travel than models designed with stainless steel diaphragms. When a Teflon diaphragm is ordered, the Teflon film on the wetted side provides good corrosion resistance for a wide range of fluids and gases including steam. Viton is the elastomeric seal on the non-wetted side. Max temperature rating is 350 °F. Special elastomers are also available. Other diaphragm materials are available
Right-angle porting is the standard piping arrangement which allows the valve to be self-draining.
Special Alloys Bypass Valve (e.g. Monel, titanium, and Hastelloy) also available.

This is a direct-acting valve with an adjustable spring operating against a flexible elastomeric diaphragm subjected to the inlet pressure of the valve. Increasing the spring compression will increase the system or line pressure to be maintained. Reducing the spring compression will reduce the system or line pressure to be maintained. An increase in system pressure beyond the set point will cause the main valve to open and relieve the excess pressure.

BPS-09

Material List and Specification

#	Item	Materials
1.	Adjusting screw	Steel
2.	Lock nut	Steel
3.	Spring chamber	Steel
4.	Spring pusher	Steel
5.	Spring	Steel
6.	Lock nut	Steel
7.	Lock washer	Steel
8.	Spring follower	Steel
9.	Diaphragm	TFE / Viton
10.	Diaphragm disc.	Stainless steel
11.	Main valve	Stainless steel
12.	Body	Stainless steel

Alternate elastomers available
Max inlet pressure 75 PSI (5.2 Bar) based on diaphragm rated press. Diaphragm min burst pressure at ambient temp is 300 psi (20 bar)

Dimensions (NPT)

A	B	C	D	E
1/4	2.75	2.50	1.00	6.25
3/8	2.75	2.50	1.13	6.50
1/2	2.75	2.50	1.31	8.25
3/4	2.75	2.50	1.50	9.50
1	4.00	4.50	2	12.38
1-1/4	4.50	4	3.44	13.25
1-1/2	4.50	4.00	3.56	16.56
2	5.00	4.50	4.13	17.25

Note: Dimensions are approximate and are subject to change without notice. Request certified dimensions before final product installation.

BPS-09-Npt Stainless Steel Back Pressure Bypass Valve

BPS-09-Npt Stainless Steel Back Pressure Bypass Valve

To View Prices in $USD Start Here (First Select Size)

Applications

Features

Principle of Operation

Dimensions/Material Item List