To display pricing, print or e-mail a quotation or order, you must follow these basic steps:+ Click here for general instructions
+ Click here for product-specific instructions- Close product-specific instructions

Use this page to print a price quote, e-mail a quote to someone or to yourself, or to order
Note E-mailing a quote to yourself speeds up the ordering process when you click on the link as it remembers the exact material combinations you selected, which you would have to reselect if you just print a hard copy. Save paper by E-mailing.

Follow these simple steps to use this page:

1.) Type in the desired quantity you wish to quote, e-mail or order online (See footnote below)

2.) Update the quantity to apply a quantity discount, if applicable

3.) Type in a pre-assigned approved discount code if you were given one

4.) Next do this"Click Here to apply discount "

4.) Click on any one of these tabs: Print This Page, or E-mail This Page, or Proceed To Order/Checkout
The E-mail feature allows you to generate the price quote which you will immediately receive in your in box which you can easily retrieve later. A separate quote number will be assigned to each item which can be referenced on future orders.

5.) A final part number will not be assigned until the selection becomes an order and it will appear on the invoice and product nameplate

6.) Follow additional instructions from the next pages

Note! Printing or e-mailing a quote cannot generate an order.
The ordering process can only be started by clicking the Order/Checkout button
and you must have your credit card in front of you.
When not ordering by credit card you must include a printout of the specific options displayed on this page, otherwise we cannot proceed with the order

RVL20-P Plastic Low-Pressure Angle Relief Valve

View Pricing/Ordering Instructions

view prices order

PVC, CPVC, PVDF, or PTFE body ( Hastelloy, Titanium, Monel or Alloy 20 Model found here & Stainless Steel Model found here)
1/2"-2" NPT THD
Accurate relief pressures from 0.50 PSI (0.03 Bar) to 75 PSI (~5 Bar)
Adjustable pressure in multiple spring ranges

Printable
Product Specs Instructions

RVL20-P Plastic Low-Pressure Angle Relief Valve

view prices order

Printable
Product Specs Instructions

View Pricing/Ordering Instructions

PVC, CPVC, PVDF, or PTFE body ( Hastelloy, Titanium, Monel or Alloy 20 Model found here & Stainless Steel Model found here)
1/2"-2" NPT THD
Accurate relief pressures from 0.50 PSI (0.03 Bar) to 75 PSI (~5 Bar)
Adjustable pressure in multiple spring ranges

Applications

Options

Features

Principle of Operation

Dimensions/Material Item List

This safety relief valve can be used for relieving pressures and maintaining upstream line pressures to a specific set point. Pressure relief valve can also be used for bypassing fluids. This is a diaphragm low-pressure valve which is used where accurate set pressures must be maintained. The large diaphragm area compared to a piston pressure relief valve produces much more accurate pressure control with very low hysteresis between opening and closing pressures. See available orifice sizes and flow Cv below.

See pricing Table to select available options

Low-pressure valve body: Available in a wide variety of high-performance engineered plastics PVC, CPVC, PTFE, PVDF.
Elastomeric diaphragm: Elastomers Diaphragm includes Teflon with reinforced Viton.
Spring chamber: Safety relief valve standard construction is PVC. Alternates: CPVC, PVDF etc.
Spring and Hardware: 302SS & 303SS Standard, 316SS Optional
Right-angle porting: Side inlet, bottom outlet is standard with this diaphragm valve manufacturer's model.

This is a diaphragm and spring type relief valve where the spring constantly opposes the pressure acting against the diaphragm which seals off the inlet port from the outlet port at the valve seat. The desired relief or bypass pressure is achieved by compressing the spring until the spring force is adequate to balance the pressure force acting against the diaphragm. When the inlet pressure exceeds the set pressure, the diaphragm will open to relieve and bypass the excess pressure. The valve will operate in a vertical orientation as illustrated, horizontal, or any other orientation.

This valve is typically mounted to a device to be protected such as a tank or other pressure containing device. If a flow stream needs to be protected from overpressure, then the valve is mounted on the side of a tee or at the end of a line branch where it will pass excess flow only when the valve opens. The outlet port of the valve is usually piped to a drain or discharged directly to atmosphere only if the liquid safe to be discharged without injuring personnel or damaging equipment nearby.

Angle Pattern Plastic Relief Valve

RVL-20P

Material List and Specification

#	Item	Materials
1.	Adjusting screw	Stainless Steel
2.	Lock nut	Stainless Steel
3.	Spring chamber	PVC
4.	Spring pusher	Stainless Steel
5.	Spring	Stainless Steel
6.	Spring Carrier	Stainless Steel
7.	Diaphragm	Teflon / Viton
8.	*Body	PVC, CPVC, PTFE

*Body also available in brass, PVC, Teflon, Monel, and Hastelloy

Dimensions

A	B	C	D	E
Dimensions (inch)
1/2	3	1.50	0.88	5.88
3/4	3	1.50	1.38	6.69
1	4	2.00	1.63	9.62
1.25	4	2.00	1.70	11.50
1.50	4.50	2.25	2.13	11.69
2	5	2.50	2.25	12.38

Note: Dimensions are approximate and are subject to change without notice. Request certified dimensions before final product installation.

RVL20-P Plastic Low-Pressure Angle Relief Valve

RVL20-P Plastic Low-Pressure Angle Relief Valve

To View Prices in $USD Start Here (First Select Size)

Applications

Options

Features

Principle of Operation

Dimensions/Material Item List